Author Archives: ridax

10-pin mini USB pinout on FLIR

The 10 pin mini USB connector can be purchased at http://www.chargeconverter.com/store/index.php?route=product/product&product_id=160 or with a pre-soldered PCB at http://www.chargeconverter.com/store/usbpcb for easier soldering with large pads for GND, Power and video out. Here is how we number the pins in this document (note that the … Continue reading

Posted in Uncategorized | Leave a comment

Making a microphone input and/or power input cable for the GoPro

Do you want to connect your GoPro Hero3/4 to external audio input and/or +5V DC power input?  Our new 10 pin mini USB connector with integrated PCB makes this easy. It has easy soldering pads for audio in 1 and … Continue reading

Posted in Uncategorized | 1 Comment

Request for a better charger for Sony Xperia Tablet Z

        I just got a Sony Xperia Tablet Z (TM) ordered a long time ago.  As you might know the unit is water tight, but that requires that the small covers over the ports are correctly seated. … Continue reading

Posted in Uncategorized | 21 Comments

Making a cable between GoPro Hero3 and HobbyKing/Boscam TS351/352/353 video sender

Do you want to connect your GoPro Hero3 to the HobbyKing/Boscam video sender to transfer audio and video?  You can easily build your own cable for this.  We are using the Ridax 10-pin mini USB connector with a small integrated PCB together … Continue reading

Posted in Uncategorized | 2 Comments

Making a cable between GoPro Hero3 and ImmersionRC video sender

Do you want to connect your GoPro Hero3 to the ImmersionRC video sender to transfer audio/video and power the GoPro externally through the Immersion?  You can easily build your own cable for this.  We are using the Ridax 10-pin mini … Continue reading

Posted in Uncategorized | 5 Comments

10 pin mini USB pinout on GoPro

The 10 pin mini USB connector can be purchased at http://www.chargeconverter.com/store/index.php?route=product/product&product_id=160 or with a pre-soldered PCB at http://www.chargeconverter.com/store/usbpcb for easier soldering. a connector with pre-soldered PCB for mic/audio input and power input http://www.chargeconverter.com/store/usbmic Here is how we number the pins in this document. +5V … Continue reading

Posted in Uncategorized | 54 Comments

Adding USB ports to Dreambox DM500HD

This document describes how to modify the DM500HD satellite receiver to add USB ports. You can get one external and one internal USB port. This modification is not supported by the satellite receiver manufacturer in any way and you are doing the modification … Continue reading

Posted in Uncategorized | 12 Comments

GoPro Hero HD bus interface

If you want to buy any dock connectors for the GoPro HD  bus you can order them online at http://www.chargeconverter.com/store/sandisk . There are different ways to number the pins in the connector, so here we first show how we number … Continue reading

Posted in Uncategorized | 37 Comments